Electrical Panel Upgrades in Tampa, FL

Our licensed electricians upgrade and replace electrical panels for homes and businesses in Tampa, FL and throughout the Tampa Bay area. If your breakers trip too often, your panel is outdated or running warm, or you are adding an EV charger, generator, or major appliance, a properly sized panel is the foundation that makes everything else work safely.

Why Electrical Panel Upgrades Matter in Tampa, FL


Your electrical panel is the control center for every circuit in your property. It takes the power coming from the utility and distributes it to every outlet, light, appliance, and piece of equipment you own. When the panel is undersized, aging, or failing, the effects show up everywhere: breakers that trip, lights that flicker, outlets that cannot keep up, and in the worst cases, overheating that creates a real fire risk.

Many properties in Tampa, FL were wired for a very different era of electrical demand. Central air conditioning, electric ranges, home offices, pool equipment, and now electric vehicles all place heavier loads on a panel than the systems of decades past were built to handle. Upgrading the panel brings your electrical system in line with how you actually use power today.

Book an Appointment

Benefits of Professional Panel Upgrades


01 Increased Capacity. Supports EV chargers, generators, and modern appliance loads without overloading your system.
02 Improved Safety. Reduces fire risk from an overloaded or outdated panel.
03 Modern Appliance Support. Built for today's electrical demand, not decades-old wiring standards.
04 Reduced Breaker Issues. Fewer trips and flickers once capacity actually matches the load.

Book an Appointment

Signs You Need a Panel Upgrade in Tampa, FL


Not every electrical hiccup means you need a new panel, but several warning signs point directly to the panel itself:

  • Breakers that trip frequently, especially when several appliances run at once
  • A panel cover that feels warm or hot to the touch
  • Buzzing, crackling, or sizzling sounds from the panel
  • Rust, corrosion, scorch marks, or discoloration on or around the panel
  • Flickering or dimming lights throughout the property
  • An older fuse box instead of a modern circuit breaker panel
  • A panel rated below 100 amps
  • No open slots for new breakers when you want to add a circuit
  • Regular reliance on extension cords and power strips
  • Plans to add an EV charger, generator, hot tub, or other high-draw equipment
  • An older panel brand with documented breaker failure concerns

If any of these sound familiar, a panel assessment is the right next step before the problem grows.

Book an Appointment

Residential Electrical Panel Upgrades in Tampa, FL


Homeowners in Tampa, FL call us for panel work for many reasons. Our residential panel services include:

  • Panel replacement for undersized, damaged, corroded, or aging panels
  • Amperage upgrades, typically from 100 amp service to 150 or 200 amp service
  • Fuse box to breaker panel conversions for older homes
  • Sub-panel installation for garages, workshops, additions, and detached structures
  • Additional circuits for kitchens, bathrooms, laundry rooms, pools, and outdoor living spaces
  • Whole-home surge protection installed at the panel to protect sensitive electronics
  • Panel relocation when the existing location is inaccessible or no longer meets code
Book an Appointment

Commercial Electrical Panel Upgrades in Tampa, FL


Businesses place heavier and more varied demands on their electrical systems than most homes. Our commercial panel services include:

  • Main panel and service upgrades for businesses that are expanding or adding equipment
  • Tenant panel work for office, retail, and multi-tenant properties
  • Sub-panel installation to distribute power across larger commercial spaces
  • Restaurant and food service capacity upgrades for refrigeration and kitchen equipment
  • Panel replacements for aging commercial buildings with outdated infrastructure
  • Load calculations to size the system correctly for current and planned equipment
Book an Appointment

Panel Upgrades for EV Chargers, Generators, and Solar


Three of the most common reasons Tampa, FL property owners upgrade a panel are adding an EV charger, a whole-home generator, or solar and battery equipment. Each one needs available capacity and a dedicated circuit that an older panel often cannot provide.

We calculate the additional load, confirm what your existing panel can support, and upgrade the panel and related wiring so the new equipment installs cleanly. A generator also needs a transfer switch that connects correctly to your panel, and we handle that connection as part of the project.

Book an Appointment

Fuse Box to Circuit Breaker Panel Conversions


Older homes in the area may still run on a fuse box. Fuse boxes were designed for much lighter electrical loads, and they often limit how many circuits and how much power a modern household can safely use. Replacing a fuse box with a modern breaker panel gives you resettable breakers, higher capacity, room for additional circuits, and compatibility with modern safety devices such as ground fault and arc fault protection where required.

Book an Appointment

Older Panel Brands and Safety Concerns


Certain older panel brands have a documented history of breakers that fail to trip during an overload or short circuit. The risk is not only a nuisance: a breaker that does not trip when it should cannot do its job during an actual fault. During every panel assessment, we identify the panel brand and age and flag any known safety concerns as part of our recommendation, even if you have not noticed any symptoms yet.

Book an Appointment

How Much Panel Capacity Do You Need


Panel capacity is measured in amps, and the right size depends on the size of the property, the equipment it runs, and your plans for the future.

  • 100 amp service is common in older, smaller homes and is often not enough for modern demand.
  • 150 amp service can work for mid-sized homes without heavy additional loads.
  • 200 amp service is the common recommendation for modern homes, especially those with central HVAC, electric appliances, or an EV charger or generator.
  • Commercial service is sized individually based on the building, equipment, and tenant needs.

We calculate your actual electrical load during the assessment instead of guessing, so the panel is sized correctly for your property.

Book an Appointment

Our Electrical Panel Upgrade Process


  1. Assessment. We inspect your current panel, identify its brand, amperage, and condition, and calculate your electrical load.
  2. Recommendation. We explain what size and type of panel fits your needs and any planned additions.
  3. Permitting. We pull the permit and coordinate with your utility and the local inspection office for Tampa, FL.
  4. Installation. We disconnect the old panel, install the new one, and handle grounding, bonding, and circuit reconnections to Florida code.
  5. Testing and inspection. We test every circuit and coordinate the required inspection so the work is fully documented.
Book an Appointment

What to Expect on Panel Upgrade Day


A panel upgrade requires a temporary power shutoff while the old panel is disconnected and the new one is installed. We schedule the timing with you in advance so you can plan around it, and we work efficiently to keep the outage as short as possible. Most residential upgrades are completed in a single day, though the exact timeline depends on the scope of the project and the utility coordination involved.

Book an Appointment

Why Choose Electrical Professionals of Florida


When the panel is the heart of your electrical system, who does the work matters. Property owners in Tampa, FL choose us because of:

  • Licensed Electrical Contractor (EC# 13012627). Work performed under a state-issued contractor license.
  • Fully Licensed & Insured. Protection for you and your property on every job.
  • BBB Accredited. A business that stands behind its work and its customers.
  • Residential & Commercial Services. One team that can handle a home panel or a full commercial service upgrade.
  • Root-Cause Diagnostic Approach. We find out why the panel is struggling instead of treating symptoms.
  • Florida Code-Compliant Work. Every installation is permitted, inspected, and built to current code.
Book an Appointment

Serving Tampa, FL and the Greater Tampa Bay Area


We provide electrical panel upgrades in Tampa, FL and across our Tampa Bay service area, including Odessa, Land O' Lakes, Lutz, Trinity, Carrollwood, Wesley Chapel, the Epperson and Mirada communities, Dade City, and Zephyrhills. If your community is not listed, call us anyway. We also serve nearby areas and will confirm whether we can get to your property.

Book an Appointment

Related Services in Tampa, FL


Panel upgrades often go hand in hand with other electrical work. Related services include:

  • EV Charger Installation
  • Whole Home Generator Installation
  • Whole-Home Rewiring
  • Lighting Installation and Upgrades
  • Residential Electrical Services
  • Commercial Electrical Services
  • Emergency Electrician Services
Book an Appointment

Frequently Asked Questions About Electrical Panel Upgrades in Tampa, FL

How do I know if I need an electrical panel upgrade in Tampa, FL?
Frequent breaker trips, a warm or buzzing panel, an older fuse box, a panel rated below 100 amps, or plans to add an EV charger or generator are all signs a panel upgrade is worth assessing.
How much does an electrical panel upgrade cost in Tampa, FL?
Cost depends on the panel's condition, the amperage you are upgrading to, and whether extra circuits or utility coordination are needed. We provide a specific estimate after assessing your property.
How long does a panel upgrade take?
Most residential panel upgrades are completed in a single day, including the temporary power shutoff needed to safely replace the panel.
Will I lose power during the upgrade?
Yes. Power is shut off temporarily while the old panel is disconnected and the new one is connected. We coordinate timing in advance so you can plan around it.
What size panel does my home need?
Many modern homes are best served by 200 amp service, while smaller homes without heavy loads may do well with 150 amps. We calculate your actual load rather than guessing.
Do I need a permit to upgrade my electrical panel?
Yes. Panel upgrades typically require a permit and an inspection. We handle both as part of the project.
What are the signs of an unsafe electrical panel?
A warm panel cover, buzzing or crackling sounds, rust, scorch marks, frequent breaker trips, and known problem panel brands are all reasons to have the panel assessed right away.
Can you upgrade my panel to support an EV charger or generator?
Yes. We evaluate your panel's capacity, calculate the added load, and upgrade the panel and wiring as needed so the equipment operates safely.
Do you replace old fuse boxes with circuit breaker panels?
Yes. Fuse box to breaker panel conversions are a common upgrade for older homes in {{wf:Name|Dynamo}} and the surrounding area.
Do you handle commercial panel upgrades in Tampa, FL?
Yes. We upgrade panels for offices, retail spaces, restaurants, and multi-tenant buildings, sizing the work to the equipment and electrical demand of the business.

Schedule Your Electrical Panel Upgrade in Tampa, FL

An undersized or aging panel does not fix itself, and the risk grows the longer it is ignored. Contact Electrical Professionals of Florida to schedule your electrical panel upgrade in Tampa, FL. We will assess your panel, recommend the right upgrade, and complete the work safely and to code.

Book an Appointment